How to Replace a SAAB Key Fob
Dealers may charge several hundred dollars for a key fob that isn't working properly. However, you can fix it yourself for less.
You'll need a small screwdriver to break the case open to get at the electronics inside. A multimeter is also required to test the battery.
Battery
Most key fobs will activate whenever you press a button, either to lock or unlock the vehicle (or to start it for those with keyless ignition). The reason for this is because they contain a battery that sends a signal to the car to inform it that you're close enough to press the starter button. If your starter button begins to behave in a erratic manner, it's most likely that the battery has worn out and needs to be replaced.
It's a fairly easy procedure, but be cautious to not harm the electronics inside the fob. If you're not sure what size battery the fob needs check for a sticker on the side. You can use a multimeter in order to test the battery and ensure that it functions.
Once you've found the appropriate battery for your key fob, you can remove it and replace it with the new one. Snap the two pieces of the fob together, and you're done. Get a few batteries so you'll always have them to use in the event that the battery inside the key fob goes out or is worn out. This will spare you the hassle of replacing the whole key fob at a later date.
Electronics
All key fobs that can lock and unlock your car remotely come with batteries. Depending on how often you use your key fob, it's not uncommon for the battery to die or for the electronic components in the key fob to wear out. It's crucial to replace your SAAB key fob battery as quickly as possible to prevent it from locking and unlocking your car in error.
Fortunately changing the battery or electronics in the SAAB key fob is a relatively simple procedure. There aren't saab 9-3 key replacement or equipment and can do it yourself with the knowledge of what you're doing. It's important to carefully remove the electronics from the case. If you push it too much, they could be damaged.
It is not uncommon for owners of SAAB 9-3 cars to lose their primary working key. It is possible to pay much to obtain an alternative key from the dealer and wait for weeks before receiving it. There is a much cheaper way to get a new key for your vehicle - our Oakland mobile SAAB key locksmith will cut you a brand new Toyota key and program it into your immobilizer.
A new Toyota key is only $120. This is less than the price of what dealers charge. It also cuts down on the cost of towing your vehicle to the dealership, and the time spent waiting for them to finish the job.
Reprogramming
It is possible to replace your manual key. This is a simple procedure and doesn't require any special tools. Simply insert a flathead screwdriver in the slot that's found in the middle of the case. Gently work the case open and you'll be able take out the old key fob. The battery and the electronics are simple to take out, but you'll need to be careful not to scratch the plastic.
In the past, it was not unusual to steal your neighbor's Volkswagen Golf 2 2. Nowadays, however, cars are using sophisticated technology to make them harder to hack into. This isn't due solely to the metal part of the car keys but rather the electronic chip embedded within them. It's smart to keep an additional key fob or to reprogramme an existing key fob that is a saab.
The cost of changing the programming of a key fob is dependent on the year, make, and model of your vehicle. It is best to consult a locksmith near you and give the year model, year, and year of your car for an accurate quote. This will tell you if the service is worth the money. It is also recommended to purchase an emergency key just in the event you lose your other keys. You'll save a lot of money in the end.
Take off the manual key
Modern key fobs that match an e-start button or act as the car keys have backup keys located inside the fob. This lets them be used as physical keys in the event that your fob's electronic circuits fail or get damaged. If you have one of these keyfobs, and notice that it's not unlocking your car as quickly or sending the signal to your car that tells you to press the start button the backup key could be dying.
There are a couple of quick solutions that can be made to alleviate this problem However, in the end time, you'll need to have the battery replaced in the earliest time possible. Replacing a car key fob battery is actually quite easy and there are numerous YouTube videos that walk you through the procedure step-by-step.
You may need to replace damaged components or perform other extensive repairs to get your device functioning properly. This could be a cracked or oxidized circuit board, or tiny electronic components that aren't fully connected to it. Ask a mechanic about the most cost-effective option is for repairing or replacing the saab remote key fob.